MEDIDOR DIGITAL

• Precisión dentro de 1% • Presets de fábrica para 20 fluidos • Certificaciones: UL, cUL, CE, ATEX, iex, anzex • 2 – 35 GPM/7,6 – 132,5 ipm • Fuente de alimentación 2 pilas AAA

• Precisión dentro de 1% • Presets de fábrica para 20 fluidos • Certificaciones: UL, cUL, CE, ATEX, iex, anzex • 2 – 35 GPM/7,6 – 132,5 ipm • Fuente de alimentación 2 pilas AAA

• Medidor electrónico preestablecido diseñado para medir y dispensar fluidos a granel que dan servicio a automóviles, camiones, autobuses y otras aplicaciones similares. • El medidor es liviano, resistente y tiene un agarre cómodo. • Se puede usar con aceites de motor, aceites para engranajes, ATF, anticongelante puro y fluidos hidráulicos. • Woks con 4 pilas alcalinas AAA, incluye entrada giratoria y salida rígida con punta antigoteo. Use 2199SF para anticongelante diluido y lavado de parabrisas.

• Medidor en línea de 1/2 "con cámara de medición de aluminio para usar con aceites, lubricantes para engranajes y soluciones a base de agua (anticongelante, protector de viento). • Presión máxima de trabajo 1450 psi. +/-. 05% de precisión. Funciona con 2 pilas alcalinas AAA.

The PIUSI K33 ATEX is an oval gear mechanical meter engineered for an accu- rate measuring of the quantity of fluid dispensed that meets the ATEX/IECEx requirements related to the use in potentially explosive atmospheres. Reliable and easy to install, it can be calibrated on site and simply fitted with both rigid or flexible pipes or can be put directly on pumps and tanks. The new commercial mechanical flow meter meets ATEX requirements for accurate metering of the dispensed quantity of fluid (petrol, kerosene, diesel fuel) in environments with a high explosion risk. It is reliable, inexpensive and easy to install and calibrate at the place of installation. Due to its low flow resistance, it is also able to operate under gravity. The K33 ATEX flow meter can be installed in any position on either rigid or flexible pipes or directly on pumps or tanks. The equipment is classified as Group II, category 2 G IIB T=85°C (T6), so the flow meter is suitable for working in areas classified as 1 and 2 in accordance with directive 99/92/CE.

The PIUSI K33 and K44 are the bestseller mechanical meters in this market. Reliable, easy to install and to calibrate, they are equipped with a nutating disk that allows them to be installed in all four flow directions. The display is available in both three or four digits, according to the model chosen.